Web T2 Multi-function Fusion Splicer Small volume, light weight; Designed by FTTH requirements of construction; Apply to bare fibers, skin line cables, jumper cables, etc; PAS image digital processing system, core to core alignment; Arc calibrated by temperature and pressure parameters; Various display group, max magnification up to 190; Metro style GUI, easy operation; 8 seconds typical splicing and 28 seconds heating time; Intelligent operation, auto heating and fusing; High definition 4.3'colorful LCD; 5800mAh high capacity and pluggable battery, long work time; USB port for software upgraded; Specifications Applicable fiber SM (ITU-TG.652), MM (ITU-TG.651), DS (ITU-TG.653), NZDS (ITU-TG.655) Cladding diameter 80 ~ 150μm Coating diameter 160 ~ 900μm Typical fusion loss SM: 0.02dB; MM: 0.01dB; DS: 0.04dB; NZDS: 0.04dB Return loss <60dB Cleaved length 10 ~ 16mm (coating diameter <250μm); 16mm ( coating diameter250 ~ 1000μm) Splicing program 40 groups Operate mode Manual, Automatic Auto-Heat Available Typical splicing time 8 seconds Heating time 26 seconds for 60mm, 40mmshrinkable sleeve Magnification 190 times for single display, 95 times for double display Photoelectric system Two high sensitive cameras , 4.3 '480 × 280 colorful LCD Splicing data record Storing up to 4000 groups of records Loss evaluation Available Tension test 1.8 ~ 2.2N Interface GUI menu interface, easy operation Battery capacity 5800mAh, 180 times fusion and heating, pluggable, real-time power monitor Power supply Adaptor, input: AC100-240V (50 / 60HZ), output: DC11 ~ 13.5V Electric pole lifetime More than 4000times fusion, pole can be replaced conveniently External port USB2.0 port, used to derive splicing record data, software upgrade Operate environment Altitude: 0 ~ 5000m; Humidity: 0 ~ 95%; Temperature: -10 ℃ ~ + 50 ℃; Wind speed: max 15m / s Volume / Weight 149mm (L) × 120mm (W) × 130mm (H) / 2.75Kg (including battery)